Cameroon Trade Tariffs
CM: Binding Coverage: All Products
CM: Binding Coverage: All Products data was reported at 14.610 % in 2019. This records an increase from the previous number of 14.410 % for 2014. CM: Binding Coverage: All Products data is updated yearly, averaging 13.980 % from Dec 1995 (Median) to 2019, with 16 observations. The data reached an all-time high of 14.610 % in 2019 and a record low of 13.450 % in 2010. CM: Binding Coverage: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Binding coverage is the percentage of product lines with an agreed bound rate. Bound rates result from trade negotiations incorporated into a country's schedule of concessions and are thus enforceable.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from World Trade Organization.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 14.610 2019 | yearly | 1995 - 2019 |
View Cameroon's CM: Binding Coverage: All Products from 1995 to 2019 in the chart:
CM: Binding Coverage: Manufactured Products
CM: Binding Coverage: Manufactured Products data was reported at 1.080 % in 2019. This records an increase from the previous number of 1.070 % for 2014. CM: Binding Coverage: Manufactured Products data is updated yearly, averaging 1.940 % from Dec 1995 (Median) to 2019, with 16 observations. The data reached an all-time high of 2.490 % in 1995 and a record low of 1.070 % in 2014. CM: Binding Coverage: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Binding coverage is the percentage of product lines with an agreed bound rate. Bound rates result from trade negotiations incorporated into a country's schedule of concessions and are thus enforceable. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from World Trade Organization.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 1.080 2019 | yearly | 1995 - 2019 |
View Cameroon's CM: Binding Coverage: Manufactured Products from 1995 to 2019 in the chart:
CM: Binding Coverage: Primary Products
CM: Binding Coverage: Primary Products data was reported at 52.930 % in 2019. This records an increase from the previous number of 52.250 % for 2014. CM: Binding Coverage: Primary Products data is updated yearly, averaging 54.580 % from Dec 1995 (Median) to 2019, with 16 observations. The data reached an all-time high of 55.540 % in 2002 and a record low of 52.250 % in 2014. CM: Binding Coverage: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Binding coverage is the percentage of product lines with an agreed bound rate. Bound rates result from trade negotiations incorporated into a country's schedule of concessions and are thus enforceable. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on data from World Trade Organization.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 52.930 2019 | yearly | 1995 - 2019 |
View Cameroon's CM: Binding Coverage: Primary Products from 1995 to 2019 in the chart:
CM: Bound Rate: Simple Mean: All Products
CM: Bound Rate: Simple Mean: All Products data was reported at 79.880 % in 2019. This stayed constant from the previous number of 79.880 % for 2014. CM: Bound Rate: Simple Mean: All Products data is updated yearly, averaging 79.880 % from Dec 1995 (Median) to 2019, with 16 observations. The data reached an all-time high of 79.880 % in 2019 and a record low of 79.870 % in 2010. CM: Bound Rate: Simple Mean: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean bound rate is the unweighted average of all the lines in the tariff schedule in which bound rates have been set. Bound rates result from trade negotiations incorporated into a country's schedule of concessions and are thus enforceable.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from World Trade Organization.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 79.880 2019 | yearly | 1995 - 2019 |
View Cameroon's CM: Bound Rate: Simple Mean: All Products from 1995 to 2019 in the chart:
CM: Bound Rate: Simple Mean: Manufactured Products
CM: Bound Rate: Simple Mean: Manufactured Products data was reported at 78.540 % in 2019. This stayed constant from the previous number of 78.540 % for 2014. CM: Bound Rate: Simple Mean: Manufactured Products data is updated yearly, averaging 79.230 % from Dec 1995 (Median) to 2019, with 16 observations. The data reached an all-time high of 79.380 % in 1995 and a record low of 78.540 % in 2019. CM: Bound Rate: Simple Mean: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean bound rate is the unweighted average of all the lines in the tariff schedule in which bound rates have been set. Bound rates result from trade negotiations incorporated into a country's schedule of concessions and are thus enforceable. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from World Trade Organization.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 78.540 2019 | yearly | 1995 - 2019 |
View Cameroon's CM: Bound Rate: Simple Mean: Manufactured Products from 1995 to 2019 in the chart:
CM: Bound Rate: Simple Mean: Primary Products
CM: Bound Rate: Simple Mean: Primary Products data was reported at 79.960 % in 2019. This stayed constant from the previous number of 79.960 % for 2014. CM: Bound Rate: Simple Mean: Primary Products data is updated yearly, averaging 79.950 % from Dec 1995 (Median) to 2019, with 16 observations. The data reached an all-time high of 79.960 % in 2019 and a record low of 79.950 % in 2012. CM: Bound Rate: Simple Mean: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean bound rate is the unweighted average of all the lines in the tariff schedule in which bound rates have been set. Bound rates result from trade negotiations incorporated into a country's schedule of concessions and are thus enforceable. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on data from World Trade Organization.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 79.960 2019 | yearly | 1995 - 2019 |
View Cameroon's CM: Bound Rate: Simple Mean: Primary Products from 1995 to 2019 in the chart:
CM: Share of Tariff Lines with International Peaks: All Products
CM: Share of Tariff Lines with International Peaks: All Products data was reported at 52.676 % in 2022. This records a decrease from the previous number of 54.703 % for 2019. CM: Share of Tariff Lines with International Peaks: All Products data is updated yearly, averaging 52.630 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 55.854 % in 2005 and a record low of 49.069 % in 1995. CM: Share of Tariff Lines with International Peaks: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Share of tariff lines with international peaks is the share of lines in the tariff schedule with tariff rates that exceed 15 percent. It provides an indication of how selectively tariffs are applied.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 52.676 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Share of Tariff Lines with International Peaks: All Products from 1994 to 2022 in the chart:
CM: Share of Tariff Lines with International Peaks: Manufactured Products
CM: Share of Tariff Lines with International Peaks: Manufactured Products data was reported at 49.838 % in 2022. This records a decrease from the previous number of 53.059 % for 2019. CM: Share of Tariff Lines with International Peaks: Manufactured Products data is updated yearly, averaging 50.693 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 53.968 % in 2005 and a record low of 47.477 % in 1995. CM: Share of Tariff Lines with International Peaks: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Share of tariff lines with international peaks is the share of lines in the tariff schedule with tariff rates that exceed 15 percent. It provides an indication of how selectively tariffs are applied. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 49.838 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Share of Tariff Lines with International Peaks: Manufactured Products from 1994 to 2022 in the chart:
CM: Share of Tariff Lines with International Peaks: Primary Products
CM: Share of Tariff Lines with International Peaks: Primary Products data was reported at 70.973 % in 2022. This records an increase from the previous number of 64.526 % for 2019. CM: Share of Tariff Lines with International Peaks: Primary Products data is updated yearly, averaging 61.179 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 70.973 % in 2022 and a record low of 56.390 % in 1994. CM: Share of Tariff Lines with International Peaks: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Share of tariff lines with international peaks is the share of lines in the tariff schedule with tariff rates that exceed 15 percent. It provides an indication of how selectively tariffs are applied. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 64.526 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Share of Tariff Lines with International Peaks: Primary Products from 1994 to 2019 in the chart:
CM: Share of Tariff Lines with Specific Rates: All Products
CM: Share of Tariff Lines with Specific Rates: All Products data was reported at 0.000 % in 2022. This records a decrease from the previous number of 0.029 % for 2019. CM: Share of Tariff Lines with Specific Rates: All Products data is updated yearly, averaging 0.000 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 4.459 % in 2009 and a record low of 0.000 % in 2022. CM: Share of Tariff Lines with Specific Rates: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Share of tariff lines with specific rates is the share of lines in the tariff schedule that are set on a per unit basis or that combine ad valorem and per unit rates. It shows the extent to which countries use tariffs based on physical quantities or other, non-ad valorem measures.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 0.000 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Share of Tariff Lines with Specific Rates: All Products from 1994 to 2022 in the chart:
CM: Share of Tariff Lines with Specific Rates: Manufactured Products
CM: Share of Tariff Lines with Specific Rates: Manufactured Products data was reported at 0.000 % in 2022. This records a decrease from the previous number of 0.024 % for 2019. CM: Share of Tariff Lines with Specific Rates: Manufactured Products data is updated yearly, averaging 0.000 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 5.084 % in 2009 and a record low of 0.000 % in 2022. CM: Share of Tariff Lines with Specific Rates: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Share of tariff lines with specific rates is the share of lines in the tariff schedule that are set on a per unit basis or that combine ad valorem and per unit rates. It shows the extent to which countries use tariffs based on physical quantities or other, non-ad valorem measures. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 0.000 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Share of Tariff Lines with Specific Rates: Manufactured Products from 1994 to 2022 in the chart:
CM: Share of Tariff Lines with Specific Rates: Primary Products
CM: Share of Tariff Lines with Specific Rates: Primary Products data was reported at 0.000 % in 2022. This records a decrease from the previous number of 0.059 % for 2019. CM: Share of Tariff Lines with Specific Rates: Primary Products data is updated yearly, averaging 0.000 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 1.307 % in 2009 and a record low of 0.000 % in 2022. CM: Share of Tariff Lines with Specific Rates: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Share of tariff lines with specific rates is the share of lines in the tariff schedule that are set on a per unit basis or that combine ad valorem and per unit rates. It shows the extent to which countries use tariffs based on physical quantities or other, non-ad valorem measures. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 0.000 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Share of Tariff Lines with Specific Rates: Primary Products from 1994 to 2022 in the chart:
CM: Tariff Rate: Applied: Simple Mean: All Products
CM: Tariff Rate: Applied: Simple Mean: All Products data was reported at 18.850 % in 2022. This records an increase from the previous number of 18.560 % for 2019. CM: Tariff Rate: Applied: Simple Mean: All Products data is updated yearly, averaging 18.815 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 19.210 % in 2006 and a record low of 18.100 % in 1995. CM: Tariff Rate: Applied: Simple Mean: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean applied tariff is the unweighted average of effectively applied rates for all products subject to tariffs calculated for all traded goods. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups. Effectively applied tariff rates at the six- and eight-digit product level are averaged for products in each commodity group. When the effectively applied rate is unavailable, the most favored nation rate is used instead. To the extent possible, specific rates have been converted to their ad valorem equivalent rates and have been included in the calculation of simple mean tariffs.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 18.560 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Applied: Simple Mean: All Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Applied: Simple Mean: Manufactured Products
CM: Tariff Rate: Applied: Simple Mean: Manufactured Products data was reported at 18.300 % in 2022. This records an increase from the previous number of 18.140 % for 2019. CM: Tariff Rate: Applied: Simple Mean: Manufactured Products data is updated yearly, averaging 18.320 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 18.670 % in 2006 and a record low of 17.640 % in 1995. CM: Tariff Rate: Applied: Simple Mean: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean applied tariff is the unweighted average of effectively applied rates for all products subject to tariffs calculated for all traded goods. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups. Effectively applied tariff rates at the six- and eight-digit product level are averaged for products in each commodity group. When the effectively applied rate is unavailable, the most favored nation rate is used instead. To the extent possible, specific rates have been converted to their ad valorem equivalent rates and have been included in the calculation of simple mean tariffs. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 18.140 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Applied: Simple Mean: Manufactured Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Applied: Simple Mean: Primary Products
CM: Tariff Rate: Applied: Simple Mean: Primary Products data was reported at 22.960 % in 2022. This records an increase from the previous number of 22.020 % for 2019. CM: Tariff Rate: Applied: Simple Mean: Primary Products data is updated yearly, averaging 21.985 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 23.200 % in 2004 and a record low of 21.560 % in 1995. CM: Tariff Rate: Applied: Simple Mean: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean applied tariff is the unweighted average of effectively applied rates for all products subject to tariffs calculated for all traded goods. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups. Effectively applied tariff rates at the six- and eight-digit product level are averaged for products in each commodity group. When the effectively applied rate is unavailable, the most favored nation rate is used instead. To the extent possible, specific rates have been converted to their ad valorem equivalent rates and have been included in the calculation of simple mean tariffs. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 22.020 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Applied: Simple Mean: Primary Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Applied: Weighted Mean: All Products
CM: Tariff Rate: Applied: Weighted Mean: All Products data was reported at 18.080 % in 2022. This records an increase from the previous number of 15.460 % for 2019. CM: Tariff Rate: Applied: Weighted Mean: All Products data is updated yearly, averaging 13.595 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 18.080 % in 2022 and a record low of 11.580 % in 2009. CM: Tariff Rate: Applied: Weighted Mean: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Weighted mean applied tariff is the average of effectively applied rates weighted by the product import shares corresponding to each partner country. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups and import weights. To the extent possible, specific rates have been converted to their ad valorem equivalent rates and have been included in the calculation of weighted mean tariffs. Import weights were calculated using the United Nations Statistics Division's Commodity Trade (Comtrade) database. Effectively applied tariff rates at the six- and eight-digit product level are averaged for products in each commodity group. When the effectively applied rate is unavailable, the most favored nation rate is used instead.;World Bank staff estimates using the World Integrated Trade Solution system, based on tariff data from the United Nations Conference on Trade and Development's Trade and Development's Trade Analysis and Information System (TRAINS) database and global imports data from the United Nations Statistics Division's Comtrade database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 15.460 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Applied: Weighted Mean: All Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Applied: Weighted Mean: Manufactured Products
CM: Tariff Rate: Applied: Weighted Mean: Manufactured Products data was reported at 17.520 % in 2022. This records an increase from the previous number of 13.770 % for 2019. CM: Tariff Rate: Applied: Weighted Mean: Manufactured Products data is updated yearly, averaging 14.285 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 17.520 % in 2022 and a record low of 13.470 % in 2001. CM: Tariff Rate: Applied: Weighted Mean: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Weighted mean applied tariff is the average of effectively applied rates weighted by the product import shares corresponding to each partner country. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups and import weights. To the extent possible, specific rates have been converted to their ad valorem equivalent rates and have been included in the calculation of weighted mean tariffs. Import weights were calculated using the United Nations Statistics Division's Commodity Trade (Comtrade) database. Effectively applied tariff rates at the six- and eight-digit product level are averaged for products in each commodity group. When the effectively applied rate is unavailable, the most favored nation rate is used instead. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on tariff data from the United Nations Conference on Trade and Development's Trade and Development's Trade Analysis and Information System (TRAINS) database and global imports data from the United Nations Statistics Division's Comtrade database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 17.520 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Tariff Rate: Applied: Weighted Mean: Manufactured Products from 1994 to 2022 in the chart:
CM: Tariff Rate: Applied: Weighted Mean: Primary Products
CM: Tariff Rate: Applied: Weighted Mean: Primary Products data was reported at 19.920 % in 2022. This records an increase from the previous number of 18.380 % for 2019. CM: Tariff Rate: Applied: Weighted Mean: Primary Products data is updated yearly, averaging 13.440 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 19.920 % in 2022 and a record low of 9.150 % in 2009. CM: Tariff Rate: Applied: Weighted Mean: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Weighted mean applied tariff is the average of effectively applied rates weighted by the product import shares corresponding to each partner country. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups and import weights. To the extent possible, specific rates have been converted to their ad valorem equivalent rates and have been included in the calculation of weighted mean tariffs. Import weights were calculated using the United Nations Statistics Division's Commodity Trade (Comtrade) database. Effectively applied tariff rates at the six- and eight-digit product level are averaged for products in each commodity group. When the effectively applied rate is unavailable, the most favored nation rate is used instead. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on tariff data from the United Nations Conference on Trade and Development's Trade and Development's Trade Analysis and Information System (TRAINS) database and global imports data from the United Nations Statistics Division's Comtrade database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 19.920 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Tariff Rate: Applied: Weighted Mean: Primary Products from 1994 to 2022 in the chart:
CM: Tariff Rate: Most Favored Nation: Simple Mean: All Products
CM: Tariff Rate: Most Favored Nation: Simple Mean: All Products data was reported at 18.030 % in 2022. This records a decrease from the previous number of 18.250 % for 2019. CM: Tariff Rate: Most Favored Nation: Simple Mean: All Products data is updated yearly, averaging 18.040 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 18.330 % in 1994 and a record low of 17.620 % in 2009. CM: Tariff Rate: Most Favored Nation: Simple Mean: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean most favored nation tariff rate is the unweighted average of most favored nation rates for all products subject to tariffs calculated for all traded goods. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 18.250 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Most Favored Nation: Simple Mean: All Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Most Favored Nation: Simple Mean: Manufactured Products
CM: Tariff Rate: Most Favored Nation: Simple Mean: Manufactured Products data was reported at 17.270 % in 2022. This records a decrease from the previous number of 17.530 % for 2019. CM: Tariff Rate: Most Favored Nation: Simple Mean: Manufactured Products data is updated yearly, averaging 17.670 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 17.870 % in 1995 and a record low of 17.220 % in 2013. CM: Tariff Rate: Most Favored Nation: Simple Mean: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean most favored nation tariff rate is the unweighted average of most favored nation rates for all products subject to tariffs calculated for all traded goods. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 17.530 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Most Favored Nation: Simple Mean: Manufactured Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Most Favored Nation: Simple Mean: Primary Products
CM: Tariff Rate: Most Favored Nation: Simple Mean: Primary Products data was reported at 20.050 % in 2022. This records a decrease from the previous number of 20.080 % for 2019. CM: Tariff Rate: Most Favored Nation: Simple Mean: Primary Products data is updated yearly, averaging 19.240 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 20.210 % in 2014 and a record low of 18.150 % in 2012. CM: Tariff Rate: Most Favored Nation: Simple Mean: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Simple mean most favored nation tariff rate is the unweighted average of most favored nation rates for all products subject to tariffs calculated for all traded goods. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on data from United Nations Conference on Trade and Development's Trade Analysis and Information System (TRAINS) database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 20.050 2022 | yearly | 1994 - 2022 |
View Cameroon's CM: Tariff Rate: Most Favored Nation: Simple Mean: Primary Products from 1994 to 2022 in the chart:
CM: Tariff Rate: Most Favored Nation: Weighted Mean: All Products
CM: Tariff Rate: Most Favored Nation: Weighted Mean: All Products data was reported at 18.080 % in 2022. This records an increase from the previous number of 15.700 % for 2019. CM: Tariff Rate: Most Favored Nation: Weighted Mean: All Products data is updated yearly, averaging 13.595 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 18.080 % in 2022 and a record low of 11.890 % in 2009. CM: Tariff Rate: Most Favored Nation: Weighted Mean: All Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Weighted mean most favored nations tariff is the average of most favored nation rates weighted by the product import shares corresponding to each partner country. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups and import weights. Import weights were calculated using the United Nations Statistics Division's Commodity Trade (Comtrade) database.;World Bank staff estimates using the World Integrated Trade Solution system, based on tariff data from the United Nations Conference on Trade and Development's Trade and Development's Trade Analysis and Information System (TRAINS) database and global imports data from the United Nations Statistics Division's Comtrade database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 15.700 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Most Favored Nation: Weighted Mean: All Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Most Favored Nation: Weighted Mean: Manufactured Products
CM: Tariff Rate: Most Favored Nation: Weighted Mean: Manufactured Products data was reported at 17.520 % in 2022. This records an increase from the previous number of 14.120 % for 2019. CM: Tariff Rate: Most Favored Nation: Weighted Mean: Manufactured Products data is updated yearly, averaging 14.290 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 17.520 % in 2022 and a record low of 13.470 % in 2001. CM: Tariff Rate: Most Favored Nation: Weighted Mean: Manufactured Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Weighted mean most favored nations tariff is the average of most favored nation rates weighted by the product import shares corresponding to each partner country. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups and import weights. Import weights were calculated using the United Nations Statistics Division's Commodity Trade (Comtrade) database. Manufactured products are commodities classified in SITC revision 3 sections 5-8 excluding division 68.;World Bank staff estimates using the World Integrated Trade Solution system, based on tariff data from the United Nations Conference on Trade and Development's Trade and Development's Trade Analysis and Information System (TRAINS) database and global imports data from the United Nations Statistics Division's Comtrade database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 14.120 2019 | yearly | 1994 - 2019 |
View Cameroon's CM: Tariff Rate: Most Favored Nation: Weighted Mean: Manufactured Products from 1994 to 2019 in the chart:
CM: Tariff Rate: Most Favored Nation: Weighted Mean: Primary Products
CM: Tariff Rate: Most Favored Nation: Weighted Mean: Primary Products data was reported at 19.920 % in 2022. This records an increase from the previous number of 18.440 % for 2019. CM: Tariff Rate: Most Favored Nation: Weighted Mean: Primary Products data is updated yearly, averaging 13.440 % from Dec 1994 (Median) to 2022, with 18 observations. The data reached an all-time high of 19.920 % in 2022 and a record low of 9.650 % in 2011. CM: Tariff Rate: Most Favored Nation: Weighted Mean: Primary Products data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Cameroon – Table CM.World Bank.WDI: Trade Tariffs. Weighted mean most favored nations tariff is the average of most favored nation rates weighted by the product import shares corresponding to each partner country. Data are classified using the Harmonized System of trade at the six- or eight-digit level. Tariff line data were matched to Standard International Trade Classification (SITC) revision 3 codes to define commodity groups and import weights. Import weights were calculated using the United Nations Statistics Division's Commodity Trade (Comtrade) database. Primary products are commodities classified in SITC revision 3 sections 0-4 plus division 68 (nonferrous metals).;World Bank staff estimates using the World Integrated Trade Solution system, based on tariff data from the United Nations Conference on Trade and Development's Trade and Development's Trade Analysis and Information System (TRAINS) database and global imports data from the United Nations Statistics Division's Comtrade database.;;The tariff data for the European Union (EU) apply to EU Member States in alignment with the EU membership for the respective countries/economies and years. In the context of the tariff data, the EU membership for a given country/economy and year is defined for the entire year during which the country/economy was a member of the EU (irrespective of the date of accession to or withdrawal from the EU within a given year). The tariff data for the EU are, thus, applicable to Belgium, France, Germany, Italy, Luxembourg, and the Netherlands (EU Member State(s) since 1958), Denmark and Ireland (EU Member State(s) since 1973), the United Kingdom (EU Member State(s) from 1973 until 2020), Greece (EU Member State(s) since 1981), Spain and Portugal (EU Member State(s) since 1986), Austria, Finland, and Sweden (EU Member State(s) since 1995), Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovakia, and Slovenia (EU Member State(s) since 2004), Romania and Bulgaria (EU Member State(s) since 2007), Croatia (EU Member State(s) since 2013). For more information, please revisit the technical note on bilateral applied tariff (https://wits.worldbank.org/Bilateral-Tariff-Technical-Note.html).
| Last | Frequency | Range |
|---|---|---|
| 19.920 2022 | yearly | 1994 - 2022 |