Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion

Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion data was reported at 58.358 % in 2014. This records a decrease from the previous number of 59.378 % for 2013. Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion data is updated yearly, averaging 53.334 % from Dec 1960 to 2014, with 55 observations. The data reached an all-time high of 63.318 % in 2009 and a record low of 33.872 % in 1960. Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s Australia – Table AU.World Bank.WDI: Environmental: Gas Emissions and Air Pollution. CO2 emissions from electricity and heat production is the sum of three IEA categories of CO2 emissions: (1) Main Activity Producer Electricity and Heat which contains the sum of emissions from main activity producer electricity generation, combined heat and power generation and heat plants. Main activity producers (formerly known as public utilities) are defined as those undertakings whose primary activity is to supply the public. They may be publicly or privately owned. This corresponds to IPCC Source/Sink Category 1 A 1 a. For the CO2 emissions from fuel combustion (summary) file, emissions from own on-site use of fuel in power plants (EPOWERPLT) are also included. (2) Unallocated Autoproducers which contains the emissions from the generation of electricity and/or heat by autoproducers. Autoproducers are defined as undertakings that generate electricity and/or heat, wholly or partly for their own use as an activity which supports their primary activity. They may be privately or publicly owned. In the 1996 IPCC Guidelines, these emissions would normally be distributed between industry, transport and 'other' sectors. (3) Other Energy Industries contains emissions from fuel combusted in petroleum refineries, for the manufacture of solid fuels, coal mining, oil and gas extraction and other energy-producing industries. This corresponds to the IPCC Source/Sink Categories 1 A 1 b and 1 A 1 c. According to the 1996 IPCC Guidelines, emissions from coke inputs to blast furnaces can either be counted here or in the Industrial Processes source/sink category. Within detailed sectoral calculations, certain non-energy processes can be distinguished. In the reduction of iron in a blast furnace through the combustion of coke, the primary purpose of the coke oxidation is to produce pig iron and the emissions can be considered as an industrial process. Care must be taken not to double count these emissions in both Energy and Industrial Processes. In the IEA estimations, these emissions have been included in this category.;IEA Statistics © OECD/IEA 2014 (https://www.iea.org/data-and-statistics), subject to https://www.iea.org/terms/;Weighted average;Restricted use: Please contact the International Energy Agency for third-party use of these data.

View Australia's Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion from 1960 to 2014 in the chart:

max 1y 5y 10y bar line area spline areaspline column Apply Get this data

There is no data available for your selected dates.

max 1y 5y 10y bar line area spline areaspline column Apply Get this data

There is no data available for your selected dates.

What was Australia's Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion in 2014?

Related Indicators for Australia CO2 Emissions from Electricity and Heat Production: % of Total Fuel Combustion

Australia Key Series

Buy Selected Data

More Indicators for Australia